Page Comparison

Clocking In/Out on a Mobile Shared Device (tablet or phone)

Please note that a device needs to be setup as a shared device by an administrator ahead of time, otherwise it will function as a standard mobile application. For additional instructions on how to set up a device as a “Shared” device please see the corresponding section in the Admin guide Clock Assignment.

Below are the instructions for the user to log into Databasics application after the device has already been set up:

1. To  To log into Databasics DATABASICS application and to start a clock in session, find the DATABASICS application icon that looks like this:Image Removed.
2. Click on the icon to open it
3. The system will prompt you to enter your User ID and password (these details should be provided to you by your local administrator at your company, if not reach out to your local support team)
4. Enter your user ID and password and click “Login”. If it is the very first time logging into Databasics application, you will be prompted to reset your password and login using the new password.
5. Once logged into the application click on the “Clock In” icon
   Image Removed MM/DD/YYYY Clock In
   Image Added
6. Provide the required distribution information (default values may be provided depending on the company setup). The time allocation fields may also vary/
7. Click on “Clock In” button Clock In button on the bottom of the screen to start the clock in session
   Image Removed
   Image Added
8. If prompted "Allow DATABASICS to use your location", select "Allow Whiie Using App"
9. The following pop-up message will appear:
   Image RemovedImage Added
10. Click “Ok” to be logged out of the system and to allow next user to login in order to start the clock in session.

Change the WBS distribution in the middle of the session using a shared device

...

:

1. Log back into the Databasics application by click on the Databasics icon Image RemovedDATABASICS App.
2. Provide your login credentials
3. Click on the timer icon Image RemovedClock Out of the existing session by clicking on the Clock Out button on the bottom of the screen: Image Removedicon Image Added
4. Press SIWTCH
5. When prompted “You "You are about to Clock Out. Would to clock out and switch to a new task, would you like to continue?”. Click “Yes”
   Image Removed
6. The following pop up appears “Clock Out is Completed…. Would you like to logout?”. Select “No”
   Image Removed
7. The system will bring you back to the Clock In Screen where the WBS distribution fields can be updated.
8. Click on the drop down arrows on the right of Time Code, Level1, Level 2 etc fields to search and update the values in the field.
9. Once all of the applicable fields are updated, click on “Clock In” button to continue the clock in session with the new distribution details.Image Removed
10. The following pop-up message will appear:
    Image Removed
11. Click “Ok” " press YES
12. This action will route you to your Favorites screen. Scroll through the list and select one of the entries from your Favorites template by pressing the Select button
13. If you need to select a Project/Task distribution that is not already in your Favorites, press the plus icon on top of the listImage Added
14. Search and select the new allocation distribution and press SELECT & SWITCHImage Added
15. A pop up window will appear confirming the "Clock in successful". Press OK to be logged out of the system and to allow next user to login in order to start the clock in session.

Clock Out of a session on a Shared Device:

1. Log back into the Databasics application by click on the Databasics iconImage RemovedDATABASICS App  
2. Provide your login credentials
3. Click on the timer icon
   Image RemovedClock Out of the existing session by clicking on the Clock Out button on the bottom of the screen
   Image Removed When Image Added
4. When prompted “You are about to Clock Out. Would you like to continue?”. Click “Yes” YES
   Image RemovedImage Added
5. The following pop up appears “Clock Out is Completed…. Would you like to logoutLog Out?”, select “Yes” YES
   Image RemovedImage Added

6. You will be logged out of the system
   

   Adding Lines from Favorites:

Any distribution details, time code-WBS combination, will be added to the user’s Favorites menu upon clock out and will be pre-populated on the next Clock In session.

Users can also manually copy lines from Favorites into their Clock In window as follows:

...

Time Clock Access Roles

There are three types of access options when using the time clock. Depending on your company settings you may or may not have access to the following features:

1. The ability to use the time clock but not be able to update/submit the entries on a timesheet
2. The ability to use the time clock and be able to enter/update/submit the leave time on a timesheet
3. The ability to use the time clock and be able to enter/update/submit any hours on a timesheet

Submit a timesheet at the end of the timesheet reporting period:

1. Click on the Home screen  Image Removed on top left corner of the window to go back to the menu list of itemsClick on “My Timesheets” tabImage RemovedImage Added
2. Scroll down to "My Timesheets" list
3. Image Added
4. Select the timesheet to submit and click on the Edit icon on the right of the timesheetImage Removedtimesheet Image Added
5. Once the timesheet opens, click on Submit button on top right corner of the screen to submit the timesheet for approvalImage Removedapproval Image Added

Modify hours on a timesheet without changing the Clock In/Clock Out details:

1. Click on the Home screen Image Removed Image Added on top left corner of the window to go back to the menu list of itemsClick on “My Timesheets” tab Image Removed
2. Scroll down to "My Timesheets" list
3. Select a the timesheet to modify submit and click on the Edit icon on the right of the timesheetImage Removedtimesheet Image Added
4. Once the timesheet is open select a line to edit , click on the edit icon on the line you want to modify the distribution details (if there is more than one line)
   
5. Click on the edit icon to modify the distribution details:
   Image Removed
6. Click on the clock icon to see the list of days and hours allocated to the selected line:
   Image Removed
7. Then click on the edit icon on a specific day to modify hours for that day.
   Image RemovedImage Added
8. In the Hours Detail For Line screen update the Hours field and click Done SAVE button when done with the modifications
   Image Removed
9. Click on the paper clip iconImage Removed to view an existing or to attach a new document.
10. To update
    Image Added
11. To add a Note on the line level or a Note attached to a specific date, click on the following iconImage Removedicon Image Added and after adding a note the icon will be like this Image Added and by clicking on it you can update note.
12. To view the clock in/clock out details and the google location of the user when clocking in or clocking out of the session, click on the following icons(this is not updatable):
    Image RemovedImage Added
13. To add a new distribution line without clock in/clock out details click on the following icon:Image Removed Image Added
14. To view/run out-of-the box PDF reports, click on the following icon:Image Removed Image Added