Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The T&E Options are the options that apply to Time and Expense.

Shared

Module Enable

Enable TimeSite Links

Enable the Databasics Time Module

Enable Time Accrual Module

Enable the Time Off Request Module- this option needs to be on in order for the users to be able to see the Time Off Request module

Enable ExpenSite Links

Enable the Databasics Expense Module

Enable Home Page Counter

Display Time PTO Balance

Displays the PTO balance on the user's home page screen

Out Of Office Options

Restrict Out of Office approval selection to the restricted set of manager

If enabled the list of available approvers in the out of office delegation screen will be restricted to the approvers loaded in the TE_APPROVAL_ASSIGN_MEM table


Expense Only

Advance Option

Apply Advance to the Report Full/Partial Amount

-P (Partial) Apply Advance to the Report in Partial Amount

-F (Fully) Apply Advance to the Report in Full Amount

Apply Advance to Company Business (B) or Due to Employee (E)

-B (Business) Apply Advance to Company Business

-E (Employee) Apply Advance Due to Employee

Approval Option

Require the Approval to approve both Exception and standard Approval on the same report

-Y/Yes Require the Approval to approve both Exception and standard Approval on the same report

-N/No Do not require the Approval to approve both Exception and standard Approval on the same report

Attendees Option

Auto Fill the owner of the report as an Attendee

-Y/Yes Auto Fill the owner of the report as an Attendee

-N/No Do not auto Fill the owner of the report as an Attendee

Enable user to select from frequently entered attendees

-Y/Yes Enable user to select from frequently entered attendees

-N/No Do not enable user to select from frequently entered attendees

Per Diem Rate

Setup By

O - Rate based on Operating Unit

L- Rate based on Location

Preauthorization Option

Auto-approve reports based on approved preauthorized reports

-Y/Yes Auto-approve reports based on approved preauthorized reports

-N/No Do not auto-approve reports based on approved preauthorized reports

Receipts Required Policy

Expense Policy Number 1 that is holding up the approval process.

Set the value for the Expense Policy Number 1 that is holding up the approval process

Expense Policy Number 2 that is holding up the approval process.

Set the value for the Expense Policy Number 2 that is holding up the approval process

Expense Policy Number 3 that is holding up the approval process.

Set the value for the Expense Policy Number 3 that is holding up the approval process

Expense Policy Number 4 that is holding up the approval process.

Set the value for the Expense Policy Number 4 that is holding up the approval process

Expense Policy Number 5 that is holding up the approval process.

Set the value for the Expense Policy Number 5 that is holding up the approval process

Approval Reset Options Based on Changes Made by Users

Expense approval reset option based on changes made by users

-A Reset all the levels from the beginning

-C Reset the current level process from the beginning

-N Reset Off

-R Reset only based on the changes

Display Last Approve and Reject Action to the Approval

-Y/Yes Display Last Approve and Reject Action to the Approval

-N/No Do not display Last Approve and Reject Action to the Approval

VAT Rate

Setup By

-O Setup by Operating Unit

-L Setup by Location

Organization/Word Breakdown Structure Level Enable

Enable Operating Unit

1/Yes Enable Operating Unit

(-1)/No Do not Enable Operating Unit

Enable Department

1/Yes Enable Department

(-1)/No Do not Enable Department

Enable Level1

1/Yes Enable Level1

(-1)/No Do not Enable Level1

Enable Level2

1/Yes Enable Level2

(-1)/No Do not Enable Level2

Enable Level3

1/Yes Enable Level3

(-1)/No Do not Enable Level 3

Enable Level4

1/Yes Enable Level4

(-1)/No Do not Enable Level4

Enable Expense Code

1/Yes Enable Expense Code

(-1)/No Do not Enable Expense Code

Mail Options










When lines are fully approved

-A Yes with Attachment

-N/No All lines on the expense report have not been approved by all approvers 

-Y/Yes All lines on the expense report have been approved by all approvers 

When lines are modified/fully approved

-A Yes with Attachment

-N/No All lines on the expense report have not been approved after some modifications 

-Y/Yes All lines on the expense report have been approved after some modifications 

When lines are rejected

-A Yes with Attachment

-N/No At least one line has not been rejected by one approver

-Y/Yes At least one line has been rejected by one approver

When lines are modified by an approver

-A Yes with Attachment

-N/No An approver has not modified at least one time 

-Y/Yes An approver has modified at least one time

When lines are sent from approver to approver (ready for approval)

-A Yes with Attachment

-N/No Approver has not finished approving the expense report and it has not been sent to the next approver 

-Y/Yes Approver has finished approving the expense report and it is now sent to the next approver 

When lines are ready for approval

-A Yes with Attachment

-N/No Employee has not submitted the expense report and it is not ready for the approval process to begin 

-Y/Yes Employee has submitted the expense report and it is now ready for the approval process to begin 

Email Owner When Proxy Submit Expense Report

-A Yes with Attachment

-N/No

-Y/Yes

When lines are rejected Email Proxy

-A Yes with Attachment

-N/No At least one line has not been rejected by one approver

-Y/Yes At least one line has been rejected by one approver 

When Authorization Report lines are fully approved Email Proxy

-A Yes with Attachment

-N/No

-Y/Yes

Only For Email Receipt Service - Enable Confirmation Email to the Sender

-A Yes with Attachment

-N/No

-Y/Yes

Default Attachment Report

-xp_rpt_adt (Expense Audit Report)

-xp_rpt_adt_del (Expense Audit Deletion Report)

-xp_rpt_adt_rej (Expense Audit Rejection Report)

-xp_rpt_bc (Expense Bar Code Report)

-xp_rpt_day (Expense Daily Report)

-xp_rpt_line (Expense by Line Report)

When Required Certification by user

-A/Yes with Attachment

-N/No

-Y/Yes


Time Only




Mail Options




When lines are fully approved

-Yes with Attachment

-N/No All lines on the expense report have not been approved by all approvers

-Y/Yes All lines on the expense report have been approved by all approvers

When lines are modified and fully approved

-Yes with Attachment

-N/No All lines on the expense report have not been approved after some modifications 

-Y/Yes All lines on the expense report have been approved after some modifications 

When lines are rejected

-Yes with Attachment

-N/No At least one line has net been rejected by one approver

-Y/Yes At least one line has been rejected by one approver

When lines are modified by an approver

-Yes with Attachment

-N/No An approver has not modified at least one time

-Y/Yes An approver has modified at least one time

When lines are sent from approver to approver (ready for approval)

-Yes with Attachment

-N/No Approver has not finished approving the expense report and it has not been sent to the next approver

-Y/Yes Approver has finished approving the expense report and it has been sent to the next approver

-Yes with Attachment

When lines are ready for approval

-Yes with Attachment

N/No Employee has not submitted the expense report and it is not ready for the approval process to begin 

-Y/Yes Employee has submitted the expense report and it is now ready for the approval process to begin 

Email Owner When Proxy Submit Timesheet

-Yes with Attachment

-N/No

-Y/Yes

When lines are rejected Email Proxy

-Yes with Attachment

-N/No At least one line has not been rejected by one approver

-Y/Yes At least one line has been rejected by one approver 

Default Attachment Report

-tm_rpt (Timesheet)

-tm_rpt_adj (Timesheet Adjustment)

-tm_rpt_adt (Timesheet Audit Report)

-tm_rpt_adt_del (Timesheet Audit Deletion Report)

-tm_rpt_adt_rej (Timesheet Audit Rejection Report)

-tm_rpt_bal (Timesheet Leave Balance Report)

Time clock in

-N/No Notfication will not be sent when a user clocks in

-Y/Yes Notfication will be sent when a user clocks in

Time clock out

-N/No Notfication will not be sent when a user clocks out

-Y/Yes Notfication will be sent when a user clocks out

Time clock out reminder

-N/No Notfication will not be sent to a user to clock out before auto clock out occurs

-Y/Yes Notfication will be sent to user remind them to clock out before auto clock out occurs

Approval Options

Department Approval

1/Yes

0/No

WBS Level1 Approval

1/Yes

0/No

WBS Level2 Approval

1/Yes

0/No

Team Approval

1/Yes

0/No

DCAA Options

Allow hours to be charged on future days

1/Yes Allow hours to be charged on future days

0/No Hours will not be allowed for future days

Allow hours to be charged on past days 

1/Yes Allow hours to be charged on past days

0/No Hours will not be able to be charged on past days

Notes required for a previous day after the following time

1/Yes Notes required for previous day after the following time

0/No Notes will not be required for previous day after the following time

Require an explanation on changes

1/Yes Require an explanation on changes

0/No Will not require an explanation on changes

Enable Other Options

Auto populate holiday

1/Yes Auto populate holiday

0/No Do not Auto populate holiday

Clock In/Out Rounding

(7) Round Hours to the 7 minute Rather than try to track work time to the minute employees commonly use increments of 5, 10, or 15 minutes and then round the actual time worked to the nearest increment. the 7 Minute rule comes into play when a company pays employees based on 15 minutes incrementsThe rounding occurs from the total from the Clock In and Clock Out. 

Example:

Clock In 12:54 PM / Clock Out 5:37 PM

Total = 4 hours and 43 minutes

Rounding would make it 4 hours and 45 minutes

(U) Round Up Rounding the law allows an employer to round the number of minutes worked, we must round to the closest tracked increment. For example the employer can round down if the user worked 43 to 40 but if the employee worked 46 then round to 50

(77) Round Hours after the Clock is rounded to 7 minute The rounding will happen on the Clock In and Clock Out. After the total is calculated if an additional rounding needs to occur, the system will round again. 

Example:

Clock In 12:54 PM / Clock Out 5:37 PM

Clock In Rounding = 1:00 PM

Clock Out Rounding = 5:30 PM

Total = 4 hours and 30 minutes

Note: The Clock In and Clock Out does not get updated. Only the total number of hours that are calculated are updated. Above is to only show how the minutes are rounded for each occurrence. 

Reporting Period Options

Number of future timesheet reporting periods to retrieve

Set the value for the number of future timesheet reporting periods to view

Number of previous timesheet reporting periods to retrieve

Set the value for the number of previous timesheet reporting periods to view

Organization/Work Breakdown Structure Level Enable

Enable Department

1/Yes Enable Department

(-1)/No Do not Enable Department

Enable Function

1/Yes Enable Function

(-1)/No Do not Enable Function

Enable Location

1/Yes Enable Location

(-1)/No Do not Enable Location

Enable Operating Unit

1/Yes Enable Operating Unit

(-1)/No Do not Enable Operating Unit

Enable Level1

1/Yes Enable Level1

(-1)/No Do not Enable Level1

Enable Level2

1/Yes Enable Level2

(-1)/No Do not Enable Level2

Enable Level3

1/Yes Enable Level3

(-1)/No Do not Enable Level3

Enable Level4

1/Yes Enable Level4

(-1)/No Do not Enable Level4

Enable Time Code

1/Yes Enable Time Code

(-1)/No Do not Enable Time Code

Enable Break Time field on Time Attendance Entry

Yes Enables the Break field on employee Time Attendance Log screen

No Disables the Break field on employee Time Attendance Log screen

Enable Travel Time field on Time Attendance Entry

Yes Enables the Travel field on employee Time Attendance Log screen

No Disables the Travel field on employee Time Attendance Log screen

Enable Other Time field on Time Attendance Entry

Yes Enables the Other field on employee Time Attendance Log screen

No Disables the Other field on employee Time Attendance Log screen

Approval Reset Options Bases on Changes Made by the User

Timesheet approval reset option based on changes made by the user

-Reset all the levels from the beginning

-C Reset the current level process from the beginning

-N Reset Off

-R Reset only based on the changes

Work Breakdown Structure Default Function level

Set the WBS default function lookup at WBS level

1/Yes Set the WBS default function lookup at WBS level

0/No Do not Set the WBS default function lookup at WBS level

...