Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The T&E Options are the options that apply to Time and Expense.




Shared

Module EnableEnable TimeSite LinksEnable the Databasics Time Module
Enable Time Accrual ModuleEnable the Time Off Request Module- this option needs to be on in order for the users to be able to see the Time Off Request module
Enable ExpenSite LinksEnable the Databasics Expense Module
Enable Home Page CounterDisplay Time PTO BalanceDisplays the PTO balance on the user's home page screen
Out Of Office OptionsRestrict Out of Office approval selection to the restricted set of managerIf enabled the list of available approvers in the out of office delegation screen will be restricted to the approvers loaded in the TE_APPROVAL_ASSIGN_MEM table


Expense Only

Advance OptionApply Advance to the Report Full/Partial Amount

-P (Partial) Apply Advance to the Report in Partial Amount

-F (Fully) Apply Advance to the Report in Full Amount
Apply Advance to Company Business (B) or Due to Employee (E)

-B (Business) Apply Advance to Company Business

-E (Employee) Apply Advance Due to Employee
Approval OptionRequire the Approval to approve both Exception and standard Approval on the same report

-Y/Yes Require the Approval to approve both Exception and standard Approval on the same report

-N/No Do not require the Approval to approve both Exception and standard Approval on the same report
Attendees OptionAuto Fill the owner of the report as an Attendee

-Y/Yes Auto Fill the owner of the report as an Attendee

-N/No Do not auto Fill the owner of the report as an Attendee
Enable user to select from frequently entered attendees

-Y/Yes Enable user to select from frequently entered attendees

-N/No Do not enable user to select from frequently entered attendees
Per Diem RateSetup By

O - Rate based on Operating Unit

L- Rate based on Location

Preauthorization OptionAuto-approve reports based on approved preauthorized reports

-Y/Yes Auto-approve reports based on approved preauthorized reports

-N/No Do not auto-approve reports based on approved preauthorized reports
Receipts Required PolicyExpense Policy Number 1 that is holding up the approval process.Set the value for the Expense Policy Number 1 that is holding up the approval process
Expense Policy Number 2 that is holding up the approval process.Set the value for the Expense Policy Number 2 that is holding up the approval process
Expense Policy Number 3 that is holding up the approval process.Set the value for the Expense Policy Number 3 that is holding up the approval process
Expense Policy Number 4 that is holding up the approval process.Set the value for the Expense Policy Number 4 that is holding up the approval process
Expense Policy Number 5 that is holding up the approval process.Set the value for the Expense Policy Number 5 that is holding up the approval process
Approval Reset Options Based on Changes Made by UsersExpense approval reset option based on changes made by users

-A Reset all the levels from the beginning

-C Reset the current level process from the beginning
-N Reset Off
-R Reset only based on the changes
Display Last Approve and Reject Action to the Approval

-Y/Yes Display Last Approve and Reject Action to the Approval

-N/No Do not display Last Approve and Reject Action to the Approval
VAT RateSetup By

-O Setup by Operating Unit

-L Setup by Location
Organization/Word Breakdown Structure Level EnableEnable Operating Unit

1/Yes Enable Operating Unit

(-1)/No Do not Enable Operating Unit
Enable Department

1/Yes Enable Department

(-1)/No Do not Enable Department
Enable Level1

1/Yes Enable Level1

(-1)/No Do not Enable Level1
Enable Level2

1/Yes Enable Level2

(-1)/No Do not Enable Level2
Enable Level3

1/Yes Enable Level3

(-1)/No Do not Enable Level 3
Enable Level4

1/Yes Enable Level4

(-1)/No Do not Enable Level4
Enable Expense Code

1/Yes Enable Expense Code

(-1)/No Do not Enable Expense Code
Mail Options










When lines are fully approved

-A Yes with Attachment

-N/No All lines on the expense report have not been approved by all approvers 
-Y/Yes All lines on the expense report have been approved by all approvers 
When lines are modified/fully approved

-A Yes with Attachment

-N/No All lines on the expense report have not been approved after some modifications 

-Y/Yes All lines on the expense report have been approved after some modifications 
When lines are rejected

-A Yes with Attachment

-N/No At least one line has not been rejected by one approver
-Y/Yes At least one line has been rejected by one approver
When lines are modified by an approver

-A Yes with Attachment

-N/No An approver has not modified at least one time 
-Y/Yes An approver has modified at least one time
When lines are sent from approver to approver (ready for approval)

-A Yes with Attachment

-N/No Approver has not finished approving the expense report and it has not been sent to the next approver 
-Y/Yes Approver has finished approving the expense report and it is now sent to the next approver 
When lines are ready for approval

-A Yes with Attachment

-N/No Employee has not submitted the expense report and it is not ready for the approval process to begin 
-Y/Yes Employee has submitted the expense report and it is now ready for the approval process to begin 
Email Owner When Proxy Submit Expense Report

-A Yes with Attachment

-N/No
-Y/Yes
When lines are rejected Email Proxy

-A Yes with Attachment

-N/No At least one line has not been rejected by one approver
-Y/Yes At least one line has been rejected by one approver 
When Authorization Report lines are fully approved Email Proxy

-A Yes with Attachment

-N/No
-Y/Yes
Only For Email Receipt Service - Enable Confirmation Email to the Sender

-A Yes with Attachment

-N/No
-Y/Yes
Default Attachment Report

-xp_rpt_adt (Expense Audit Report)

-xp_rpt_adt_del (Expense Audit Deletion Report)
-xp_rpt_adt_rej (Expense Audit Rejection Report)
-xp_rpt_bc (Expense Bar Code Report)
-xp_rpt_day (Expense Daily Report)
-xp_rpt_line (Expense by Line Report)
When Required Certification by user

-A/Yes with Attachment

-N/No
-Y/Yes


Time Only




Mail Options




When lines are fully approved

-A Yes with Attachment

-N/No All lines on the expense report have not been approved by all approvers
-Y/Yes All lines on the expense report have been approved by all approvers
When lines are modified and fully approved

-A Yes with Attachment

-N/No All lines on the expense report have not been approved after some modifications 
-Y/Yes All lines on the expense report have been approved after some modifications 
When lines are rejected

-A Yes with Attachment

-N/No At least one line has net been rejected by one approver
-Y/Yes At least one line has been rejected by one approver
When lines are modified by an approver

-A Yes with Attachment

-N/No An approver has not modified at least one time
-Y/Yes An approver has modified at least one time
When lines are sent from approver to approver (ready for approval)

-A Yes with Attachment

-N/No Approver has not finished approving the expense report and it has not been sent to the next approver
-Y/Yes Approver has finished approving the expense report and it has been sent to the next approver
When lines are ready for approval

-A Yes with Attachment

-N/No Employee has not submitted the expense report and it is not ready for the approval process to begin 
-Y/Yes Employee has submitted the expense report and it is now ready for the approval process to begin 
Email Owner When Proxy Submit Timesheet

-A Yes with Attachment

-N/No
-Y/Yes
When lines are rejected Email Proxy

-A Yes with Attachment

-N/No At least one line has not been rejected by one approver
-Y/Yes At least one line has been rejected by one approver 
Default Attachment Report

-tm_rpt (Timesheet)

-tm_rpt_adj (Timesheet Adjustment)
-tm_rpt_adt (Timesheet Audit Report)
-tm_rpt_adt_del (Timesheet Audit Deletion Report)
-tm_rpt_adt_rej (Timesheet Audit Rejection Report)
-tm_rpt_bal (Timesheet Leave Balance Report)

Time clock in

-N/No Notfication will not be sent when a user clocks in

-Y/Yes Notfication will be sent when a user clocks in
Time clock out-N/No Notfication will not be sent when a user clocks out
-Y/Yes Notfication will be sent when a user clocks out
Time clock out reminder-N/No Notfication will not be sent to a user to clock out before auto clock out occurs
-Y/Yes Notfication will be sent to user remind them to clock out before auto clock out occurs
Approval OptionsDepartment Approval

1/Yes

0/No
WBS Level1 Approval

1/Yes

0/No
WBS Level2 Approval

1/Yes

0/No
Team Approval

1/Yes

0/No
DCAA OptionsAllow hours to be charged on future days

1/Yes Allow hours to be charged on future days

0/No Do not No Allow hours to be charged on future dayspast days 
Require an explanation on changes

1/Yes Require an explanation on changesYes Notes required for a previous day after the following time

0/No Do not Require an explanation on changes
Enable Other OptionsAuto populate holiday

1/Yes Auto populate holiday

0/No Do not Auto populate holiday
Clock In/Out Rounding

(7) Round Hours to the 7 minute Rather than try to track work time to the minute employees commonly use increments of 5, 10, or 15 minutes and then round the actual time worked to the nearest increment. the 7 Minute rule comes into play when a company pays employees based on 15 minutes incrementsThe rounding occurs from the total from the Clock In and Clock Out. 

Example:

Clock In 12:54 PM / Clock Out 5:37 PM

Total = 4 hours and 43 minutes

Rounding would make it 4 hours and 45 minutes

(U) Round Up Rounding the law allows an employer to round the number of minutes worked, we must round to the closest tracked increment. For example the employer can round down if the user worked 43 to 40 but if the employee worked 46 then round to 50


(77) Round Hours after the Clock is rounded to 7 minute The rounding will happen on the Clock In and Clock Out. After the total is calculated if an additional rounding needs to occur, the system will round again. 

Example:

Clock In 12:54 PM / Clock Out 5:37 PM

Clock In Rounding = 1:00 PM

Clock Out Rounding = 5:30 PM

Total = 4 hours and 30 minutes

Note: The Clock In and Clock Out does not get updated. Only the total number of hours that are calculated are updated. Above is to only show how the minutes are rounded for each occurrence. 

Reporting Period OptionsNumber of future timesheet reporting periods to retrieveSet the value for the number of future timesheet reporting periods to view
Number of previous timesheet reporting periods to retrieveSet the value for the number of previous timesheet reporting periods to view
Organization/Work Breakdown Structure Level EnableEnable Department

1/Yes Enable Department

(-1)/No Do not Enable Department
Enable Function

1/Yes Enable Function

(-1)/No Do not Enable Function
Enable Location

1/Yes Enable Location

(-1)/No Do not Enable Location
Enable Operating Unit

1/Yes Enable Operating Unit

(-1)/No Do not Enable Operating Unit
Enable Level1

1/Yes Enable Level1

(-1)/No Do not Enable Level1
Enable Level2

1/Yes Enable Level2

(-1)/No Do not Enable Level2
Enable Level3

1/Yes Enable Level3

(-1)/No Do not Enable Level3
Enable Level4

1/Yes Enable Level4

(-1)/No Do not Enable Level4
Enable Time Code

1/Yes Enable Time Code

(-1)/No Do not Enable Time Code
Enable Break Time field on Time Attendance EntryYes Enables the Break field on employee Time Attendance Log screen
No Disables the Break field on employee Time Attendance Log screen
Enable Travel Time field on Time Attendance EntryYes Enables the Travel field on employee Time Attendance Log screen
No Disables the Travel field on employee Time Attendance Log screen
Enable Other Time field on Time Attendance EntryYes Enables the Other field on employee Time Attendance Log screen
No Disables the Other field on employee Time Attendance Log screen
Approval Reset Options Bases on Changes Made by the UserTimesheet approval reset option based on changes made by the user

-A Reset all the levels from the beginning

-C Reset the current level process from the beginning

-N Reset Off

-R Reset only based on the changes
Work Breakdown Structure Default Function levelSet the WBS default function lookup at WBS level

1/Yes Set the WBS default function lookup at WBS level

0/No Do notSet the WBS default function lookup at WBS level

...